PreSonus Eris® Pro 4 Monitor Speaker (Single)
4.5-inch 2-way biamped, active coaxial studio monitors for stereo mix environments and Dolby Atmos immersive rooms
Overview
The Eris Pro 4 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns – unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
The Eris Pro 4 also delivers finely detailed transient response, and stunning dynamics that create a natural and less fatiguing listening experience. A 1-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 4.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 80 Watts of power allows the Eris Pro 4 to reach down to 50 Hz.
Acoustic tuning controls let you configure the Eris Pro 4 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.
Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You’ll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 4 monitors into any stereo or multi-channel system.
Sold individually.
Overview
Features
- Single point-source coaxial design for wider sweet spot and better phase alignment
- 4.5-inch woven composite low-frequency driver
- 1-inch, ultra-low mass, silk-dome, high frequency driver
- Crossover Frequency, 3.4 kHz
- 80W, Class AB amplification
- 50 Hz to 20 kHz frequency response
- 99 dB Peak SPL (@ 1 meter)
- Acoustic Tuning Controls:
- Acoustic Space (flat, -2, -4 dB)
- High Frequency (±6 dB, center 10 kHz, continuously variable)
- Mid Frequency (±6 dB, center 1 kHz, continuously variable)
- Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
- XLR and 1/4-inch TRS balanced rear inputs
- RCA unbalanced rear-panel input
- Provisions for wall and ceiling mounting (mounts sold separately)
- Protection:
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- Power Saver mode (engages after 40 minutes)
Studio One Pro 7 DAW Software License Included
Accessories
- Footswitch: NA
Electronics
- Input Impedance: 10 kΩ
- Voltage Requirements: 100-240 VAC, 50-60 Hz
General
- Color: Black
- Product Name: Eris® Pro 4, Black, NA
- Series: Eris®
Hardware
- Audio Controls: Volume High Frequency (±6 dB, center 10 kHz, continuously variable) Mid Frequency (±6 dB, center 1 kHz, continuously variable)
- Cabinet Material: Vinyl-Laminated, Medium-Density Fiberboard
- HF Power: 35 Watts
- HF Transducers: 1” Ultra Low Mass, Silk Dome Tweeter (Coaxial)
- LF Power: 45 Watts
- LF Transducers: 4.5″ Woven Glass Fiber Composite (Coaxial)
- Monitor Inputs: 1- Balanced XLR, 1- Balanced 1/4” TRS, 1- Unbalanced RCA
- Monitor Type: Horn-Loaded Coaxial 2-Way Active
- Power Amplifier Type: Class AB
Measurements
- Product Depth: 8.6″ (21.8 cm)
- Product Height: 9″ (22.9 cm)
- Product Width: 7.5″ (19 cm)
Miscellaneous
- Power Cable: IEC
- Protections: RF Interference Output-Current Limiting Over-Temperature Turn-On/Off Transient Subsonic Filter
Performance
-
Peak SPL: 99 dB (@ 1 meter)
Speakers
- Crossover Frequency: 3.4 kHz
Related products
Studio Monitors
